| Alloy group | Principal Alloying Element |
|---|---|
| 1xxx | Iron and silicon |
| 2xxx | Copper |
| 3xxx | Manganese |
| 5xxx | Magnesium |
| 6xxx | Magnesium and Silicon |
| 7xxx | Zinc |
| Products | Specs |
|---|---|
 1100 H14 Sheet |
ASTM B-209 |
| Products | Specs |
|---|---|
| 2024 O/T3 Clad & Bare Sheet |
AMS QQ-A-250/4, AMS QQ-A-250/5, AMS 4035, AMS 4037, AMS 4461, AMS 4462 |
 2024 T351 Plate |
AMS QQ-A-250/4, ASTM B-209, AMS 4037, AMS-STD-2154, BSS-7055 |
  2024 T3/T3511 Extruded Rod & Bar |
AMS QQ-A-200/3, ASTM B-211 |
| 2024 T4/T3/T351 Cold Finished Rod & Bar |
AMS QQ-A-225/6, ASTM B-211 |
| Products | Specs |
|---|---|
| 2124 T851 Aluminum Plate |
AMS QQ-A-250/29, MMS-149, AMS STD-2154, BSS-7055 |
| Products | Specs |
|---|---|
| 2219 T851 Plate |
AMS QQ-A-250/30, BSS 7055, AMS STD-2154 |
| Products | Specs |
|---|---|
| 3003-H14 Coil/Sheet |
ASTM B-209 |
| Products | Specs |
|---|---|
| 5052 H32 Coil/Sheet & Plate |
AMS QQ-A-250/8, ASTM B-209 |
| Products | Specs |
|---|---|
| 5083 H116/H32/H321 Plate |
ASTM B-928 |
| Products | Specs |
|---|---|
| 5086 H116/H32 Plate |
ASTM B-928 |
| 6061 Sheet & Plate | Specs |
|---|---|
| 6061 T6/T651 Sheet & Plate |
AMS 4027, ASTM B-209 |
| 6061 O Sheet |
AMS 4025, ASTM B-209 |
| 6061 T4 Sheet |
AMS 4026, ASTM B-209 |
| 6061 Rod & Bar | Specs |
|---|---|
| 6061 T6/T651 Cold Finished Rod |
AMS QQ-A225/8, ASTM B-211, AMS 4117 |
| 6061 T6/T6511 Extruded Rod & Bar |
AMS-QQ-A200/8, ASTM B-221 |
| 6061 Tube & Pipe | Specs |
|---|---|
 6061 T6/T6511 Seamless Round Tube & Pipe |
ASTM B-241 |
| 6061 T6/T6511 Structural Round Tube & Pipe |
ASTM B-221 Schedule 40 Pipe Schedule 80 Pipe |
| 6061 T6/T6511 Bright Finish Diamond Tread Plate |
ASTM B-221 |
 6061 T52/T42/T1/T6 Structural Square Tube |
ASTM B-221 |
| 6061 Structural Products | Specs |
|---|---|
 6061 T6 Association Beam |
ASTM B-221 |
 6061 T6 Association Channel |
ASTM B-221 |
| 6061 T6 Structural Channel |
ASTM B-221 |
 6061 T6 Structural Angle |
ASTM B-221 |
| 6061 T6 Structural Beam |
ASTM B-221 |
| 6061 T6 Wide Flange Beam |
ASTM B-221 |
 6061-T6 T Section |
ASTM B-221 |
 6061-T6 Z Section |
ASTM B-221 |
| Products | Specs |
|---|---|
| 6063 T52 Rod & Bar |
ASTM B-221 |
 6063-T52 Architectural Channel |
ASTM B-221 |
| 6063-T52 Architectural Angle |
ASTM B-221 |
| 6063-T52 T Section |
ASTM B-221 |
| 6063-T52 Z Section |
ASTM B-221 |
| 6063-T52 Square Tube |
AMS QQ-A-200/9, ASTM B-221 |
| 6063-T52 Rectangular Tube |
ASTM B-221 |
| 6063-T52/T42/T1/T6 Structural Pipe |
ASTM B-221, ASTM B-429 Schedule 40 Pipe Schedule 80 Pipe |
| Products | Specs |
|---|---|
| 7050 T7451 Plate |
AMS 4050, BMS 7-323, BSS-7055, AMS STD-2154 |
| Products | Specs |
|---|---|
| 7075 T6 Clad & Bare Sheet |
AMS QQ-A-250/12, ASTM B-209, AMS 4045, AMS 4049 |
| 7075 T651 Plate |
AMS QQ-A-250/12, AMS 4045, ASTM B-209 |
| 7075 T651 Cold Finished Rod & Bar |
ASTM B-211, AMS QQ-A-225/9, AMS 4123 |
| 7075 T73/T7351 Sheet & Plate |
AMS QQ-A-250/12, AMS 4078, AMS STD-2154 |
| 7075 T73/T7351 Cold Finished Rod & Bar |
ASTM B-211, AMS QQ-A-225/9, AMS 4124 |
| Products | Specs |
|---|---|
| 7475 T7351 Plate |
AMS 4202, AMS STD-2154, BSS-7055 |
| Products | Specs |
|---|---|
| 3003 H22 Bright Finish Diamond Tread Plate |
ASTM B-209 |
| 4017 H22 Bright Finish Diamond Tread Plate |
ASTM B-209 |
| 5086 H34 Diamond Tread Plate – 0.125″ |
|
| 6061 T6 Tread Plate – Dull Finish |
ASTM B-632 |
| Products | Thickness |
|---|---|
| Composite Panels in Various Colos |
3mm |
*Other thicknesses and colors are available from production
An aluminum alloy is a chemical composition where other elements are added to pure aluminum in order to enhance its properties, primarily to increase its strength. These other elements include iron, silicon, copper, magnesium, manganese and zinc at levels that combined may make up as much as 15 percent of the alloy by weight. Alloys are assigned a four-digit number, in which the first digit identifies a general class, or series, characterized by its main alloying elements.
| Lightweight | Durable | Easy to process | Corrosion resistant | Available in a wide variety of alloys |
2024 aluminum alloy is composed mainly of aluminum, copper and magnesium. In addition it includes other metallic elements like iron, silicon, manganese and zinc. 2024 is one of the most popular high-strength alloys and is the predominant 2XXX series aircraft alloy. 2024 has high strength after heat treatment but with low corrosion resistance. Working temperatures 212°F (100°C) material must be heat treated. Maximum operating temperature is 302°F (150°C) and under certain conditions is suitable for welding. Used for the manufacture of components withstanding medium or acute pressure, applications requiring high durability whilst under pressure or experiencing sharply fluctuating temperatures as with aviation components.
Typical product applications include: seat frames and covers, safety barriers, brake drum cooling ribs, supports and struts, steering columns and links, train and vehicle construction as well as many building industry applications.
Product List
2124 Aluminum alloy is a higher purity form of 2024 and was developed specifically for high-temperature applications, offering better fracture toughness and good strength and creep resistance. The aerospace sector is a primary market for this alloy due to its guaranteed fracture toughness, allowing it to find specific use in critical components, such as the fuselage and wings. 2124 Aluminum alloy also finds use in applications requiring improved short-transverse ductility.
Product List
2219 Aluminum alloy has a high specific strength, offering good low and high temperature mechanical properties, high fracture toughness, and good stress corrosion resistance. These characteristics make it suitable for high-strength welded parts and structural parts that work at a high temperature of 315°C. 2219 is a heat-treatable and strengthened deformed Aluminum Alloy. Its mechanical properties are greatly improved after solution aging treatment. It finds wide application in the aerospace and aviation industries.
Product List
3003-H14 alloy sheets and plates can be cut-to-size to various dimensions. 3003-H14 sheets are occasionally substituted for 5052. In round tubes, 3003-H14 is used when tubes softer than 6061-T6 are needed.
Aluminum 3003-H14 applications and uses include cooking utensils, decorative trim, awnings, siding, acoustic ceilings, corrugated sheets, storage tanks, pipes, metal work, chemical equipment, heat exchangers, air condition evaporators, motor vehicle radiators, freezer linings, cooking utensils, bakery molds and containers.
Product List
5052 aluminum alloy contains 2.5% magnesium. It can be used in everything from fuel tanks to refrigerators and even storm shutters. Due to its ease of workability, weldability, and natural corrosion resistance, 5052 is used for manufactured goods.
Home: cabinets, appliances, fans, refrigerators, freezers, and fencing.
Transportation: aircraft, bus and truck manufacturing – and especially in fuel tanks. It is also used in other transportation-related applications such as road signs and traffic lights.
Product List
5083/5086 are high magnesium Aluminum alloys that are particularly resistant to salt water corrosion and used in marine and defense industries. They are easy to form, stamp and weld.
Product List
6061 is a member of a series of precipitation-hardened aluminum alloys with magnesium and silicon, characterized by good hot and cold forming (except T6) and good weldability in virtually all processes, including the resistance method, good resistance to atmospheric corrosion even in the conditions of the marine climate or in the atmosphere of heavy industrial production.
6061 alloy can be soft annealed and then heat cured. The standard heat treatment is solution annealing with cooling in water and artificial aging with cooling in air. 6061 alloy is suitable for surface treatment by anodic oxidation and can therefore also be used for load-bearing elements of interior equipment and furniture.
6061-T6 alloy is a stronger version, with a downside of lower flexibility, making it hard to form; it is used in many applications due to its hard wearing, load-bearing nature.
Aluminum Alloy 6063 offers excellent response for anodizing in its T5, T52 and T6 lustrous finish tempers. The most common methods are clear and color dying, bright dipping and hard coat. Alloy 6063 in the T5, T52 and T6 conditions is often used for electrical application due good electrical conductivity. T52 temper offers excellent response for anodizing. Alloy 6063 is for many products, projects and applications, such as architectural and building applications, extrusions, window frames, doors, shop fittings, pipes and tubes for Irrigation systems, railing and furniture. 6063 Aluminum square bar is used where surface finish, low weight and corrosion resistance are required.
Product List
7050 is the premier aluminum alloy choice for aerospace applications. It offers the best combination of strength, resistance to stress corrosion cracking (SCC) and toughness.
Product List
7075 Aluminum alloy has been the 7XXX series standard workhorse of the aerospace industry for decades. Its high strength benefit due to chromium addition provides good stress-corrosion cracking resistance in sheet products. Its good balance of properties makes alloy 7075 the baseline metal for aerospace applications. 7075 has also been thoroughly evaluated for corrosion resistance in atmospheric weathering and exfoliation in all currently available tempers. It is also used in defense industries, mold material in the plastics industry, aircraft fittings, gears and shafts, fuse parts, meter shafts and gears, missile parts, regulating valve parts, worm gears and keys.
Product List
7475 aluminum is a controlled toughness alloy specialized for applications that require a combination of high strength, superior fracture toughness and resistance to fatigue crack propagation. Due to its characteristics, this alloy is specified for high performance aerospace applications where high fracture toughness is a major consideration. Alloy 7475 in temper T7351 is recommended for optimum resistance to stress corrosion cracking.
Product List
Tread Plate is also known as Aluminum diamond plate, durbar floor plate and checker plate. With a raised diamond pattern on one side, it is typically made from aluminum or stainless steel and comes in a range of thicknesses. Its weight is considerably light but still robust, and it is very easy to clean.
It also features non-skid properties thanks to its raised surface, as well as corrosion resistance. Owing to its excellent slip resistance and resilience, diamond tread plate aluminum is used in a variety of high-traffic areas in industrial settings, for flooring, platforms and more where protection and traction are essential.
3003-H22 Diamond Tread Plate Aluminum has a shiny finish. It is widely used for truck beds and trailers, walkways and cat walks, flooring, wall panels, tool boxes, decorative trim, architectural uses, etc. Easily formed, welded and drilled, this product is a common choice for architectural and decorative applications, thanks to its strength, durability and attractive finish.
6061-T6 Aluminum Diamond Plate has a dull mill finish. It is widely used for walkways and cat walks, flooring, and some architectural uses, product design, aluminum picture frames and much more. It provides reliable strength and the highest level of corrosion resistance of all heat treated aluminums, as well as good machinability and weldability.
4017-H22 Aluminum Diamond Plate has a shiny finish and is equivalent to 3003. It is used for building, vehicles, transportation, manufacturing and architectural applications.
Product List
Hadco Aluminum Composite Panels are suitable for both exterior and interior architectural applications. The panels are polyester-coated for interior applications, as well as for industrial and special product design. They are easy to process, maintain and install, offering excellent torsion strength, impact resistance and weather resistance. Typical applications include signage, corporate logos, column covers, interior partitions, canopies, equipment enclosures, kiosks, exhibitions and display platforms. Hadco Aluminum Composite Panels are available in 3mm thickness and can be custom-milled for various colors and thicknesses upon request.
Product List
Hadco apps
General Terms and Conditions | Privacy policy
© 2022 - 2024 Hadco Metal Trading Co., LLC | Web: Phares s.r.o.